top of page
Assessor observing a plant operator complete a Verification of Competency assessment on an excavator

What Is a Verification of Competency (VOC) and Why Civil Sites Require One

admin427480
Sep 17
3 min read

A Verification of Competency (VOC) is a practical, on-machine assessment that confirms a plant operator can safely and competently operate a specific piece of equipment — as distinct from a ticket, which only confirms they completed training. Civil sites increasingly require a VOC before letting an operator work unsupervised, because a High Risk Work Licence or statement of attainment proves someone was assessed once, on one machine, at one point in time — not that they can run your excavator, grader, or roller today.

As Queensland's Labour Hire Licensing Act enforcement has escalated through 2026, host businesses are paying closer attention to everything a labour hire provider does before a worker sets foot on site — and VOC processes have become one of the clearest signals of a provider that takes competency seriously rather than just supplying a ticket.

Why isn't a ticket enough on its own?

A ticket — whether it's a High Risk Work Licence or a training provider's statement of attainment — confirms someone completed a course and passed an assessment, usually on a specific machine, at a training facility, under controlled conditions. It doesn't tell you whether that person has operated a machine in the last two years, whether they can handle your specific attachment configuration, or whether they can work safely in your site's particular conditions — near live services, on a batter, in a confined access. A VOC closes that gap by testing the person against the actual job, not a training curriculum.

What does a VOC assessment actually involve?

A proper VOC is hands-on. The operator gets into the seat of a machine comparable to the one they'll be using, and a competent assessor observes them complete representative tasks — for an excavator, that might be trenching to a marked grade, safe swing and load-over-truck technique, and safe operation near a simulated service; for a grader, it might be holding a fine trim line; for a roller, correct pass pattern and speed for the material. The assessor is checking judgement and technique, not just whether the controls are operated correctly.

Why do civil sites specifically require this?

Civil and infrastructure sites carry higher consequence risk than most other plant operator environments — live services underground, other plant and workers in close proximity, and precision tolerances tied to engineering specs. A principal contractor or site safety system that requires VOCs is trying to eliminate a specific failure mode: an operator who's ticketed but not actually competent on the machine or task in front of them. Many principal contractors now require VOC evidence as a condition of mobilising plant operators, particularly on Tier 1 and government-funded infrastructure projects.

How does this connect to labour hire specifically?

This is exactly where a lot of generic labour hire falls short. A provider supplying "a plant operator" without a genuine VOC process is passing the competency risk straight to the host business — if something goes wrong, the fact that the worker held a ticket won't be much protection if they'd never actually been assessed on that machine. A provider running VOCs machine by machine — excavator, grader, roller, loader, dozer — as a standard part of onboarding is doing the vetting work before the worker ever arrives on your site, not after something's gone wrong.

What should you ask your labour hire provider about VOCs?

Ask whether VOC is standard practice or something done on request, how recently the operator's VOC was completed, and whether it covers the specific machine class and attachment configuration you need. A provider that treats VOC as a genuine gate — not a checkbox — will have clear, specific answers to all three.

Frequently Asked Questions

Is a VOC a legal requirement in Queensland?

Not universally by law, but many principal contractors and site safety management systems require it as a condition of engagement, particularly on larger civil and infrastructure projects.

How is a VOC different from a High Risk Work Licence?

A High Risk Work Licence is a formal qualification issued after assessment on a specific machine type at a point in time. A VOC is a practical, current assessment confirming the operator can competently run the actual machine and task in front of them.

How often should a VOC be renewed?

There's no single fixed interval, but best practice is to reassess when an operator hasn't used a machine class recently, or when moving to a significantly different machine size or attachment configuration.

Does Broader Workforce VOC-check every plant operator?

Yes — VOC assessment by machine class (excavator, grader, roller, loader, dozer) is a standard part of how we vet operators before they're placed on a client site, not an optional add-on.

 
 
 

Comments


bottom of page